Efficient Material Laser Beam Ablation with a Picosecond Laser
Efficient Material Laser Beam Ablation with a Picosecond Laser
活動訊息
普發一萬放大術：滿千登記抽萬元好禮
全站滿$1000送100點金幣，可累送! 新會員直接領$500！
內容簡介
Ultra-short pulse laser processing of ultra-hard materials requires an accurate and agile experimental and analytical investigation to determine an efficient choice of parameters and settings to optimize ablation. Therefore, this work presents a quality-oriented experimental approach and an analytical approach for the modeling and validation of multi-pulse picosecond laser beam ablation on cemented tungsten carbide. This work starts with a review of literature and state-of-the-art theories of four relevant areas for this research: picosecond lasers, laser beam ablation process, cemented tungsten carbide (WC) and quality-oriented tools. Subsequently, a concept for an efficient material laser beam ablation with a picosecond laser was introduced. Furthermore, two approaches for the investigation are presented from an experimental and analytical perspective, respectively. The first approach introduced a methodology for the identification of influential parameters. It executes a quality-oriented methodology based on the SWOT analysis, cause-and-effect diagram and the variable search methodology. The conclusion of the methodology gave the interaction of pulse repetition rate and scanner speed in the form of pulse overlap and track overlap PO/TO as the most influential parameter in the maximization of the ablation rate. The second most influential factors resulted laser beam power and burst-mode. The second approach, description of the model, executes a theoretical analysis of the picosecond laser beam ablation of cemented WC by the application of the Beer-Lambert law and multi-pulse ablation modeling. The unavailable material properties were obtained by experimental investigations, like in the cases of the incubation factor and the reflectivity factor. Threshold fluence for cemented WC was determined by the application of the heat transfer theory and input power intensity was adapted to a Gaussian beam profile. At the end of the approach, power density visualizations of a picosecond laser pulse under the five available pulse repetition rates were modeled and validated. The findings from the adaptation of the Beer-Lambert law acted as basis for development of the multi-pulse laser ablation model for both single-pulse mode and burst-mode, respectively. Based on the definition of the number of pulses N irradiating the same area, the corresponding threshold fluence for N, the input fluence and incubation factor, ablation depth was modeled and experimentally validated. Finally, results and conclusions of both approaches were discussed and a framework for an efficient laser beam ablation was presented. Recommendations for further actions on research and industry were introduced at the end of the work.
配送方式
-
台灣
- 國內宅配：本島、離島
-
到店取貨：
-
海外
- 國際快遞：全球
訂購/退換貨須知
加入金石堂 LINE 官方帳號『完成綁定』，隨時掌握出貨動態：
商品運送說明：
- 本公司所提供的產品配送區域範圍目前僅限台灣本島。注意！收件地址請勿為郵政信箱。
- 商品將由廠商透過貨運或是郵局寄送。消費者訂購之商品若無法送達，經電話或 E-mail無法聯繫逾三天者，本公司將取消該筆訂單，並且全額退款。
- 當廠商出貨後，您會收到E-mail出貨通知，您也可透過【訂單查詢】確認出貨情況。
- 產品顏色可能會因網頁呈現與拍攝關係產生色差，圖片僅供參考，商品依實際供貨樣式為準。
- 如果是大型商品（如：傢俱、床墊、家電、運動器材等）及需安裝商品，請依商品頁面說明為主。訂單完成收款確認後，出貨廠商將會和您聯繫確認相關配送等細節。
- 偏遠地區、樓層費及其它加價費用，皆由廠商於約定配送時一併告知，廠商將保留出貨與否的權利。
提醒您！！
金石堂及銀行均不會請您操作ATM! 如接獲電話要求您前往ATM提款機，請不要聽從指示，以免受騙上當！
退換貨須知：
**提醒您，鑑賞期不等於試用期，退回商品須為全新狀態**
-
依據「消費者保護法」第19條及行政院消費者保護處公告之「通訊交易解除權合理例外情事適用準則」，以下商品購買後，除商品本身有瑕疵外，將不提供7天的猶豫期：
- 易於腐敗、保存期限較短或解約時即將逾期。（如：生鮮食品）
- 依消費者要求所為之客製化給付。（客製化商品）
- 報紙、期刊或雜誌。（含MOOK、外文雜誌）
- 經消費者拆封之影音商品或電腦軟體。
- 非以有形媒介提供之數位內容或一經提供即為完成之線上服務，經消費者事先同意始提供。（如：電子書、電子雜誌、下載版軟體、虛擬商品…等）
- 已拆封之個人衛生用品。（如：內衣褲、刮鬍刀、除毛刀…等）
- 若非上列種類商品，均享有到貨7天的猶豫期（含例假日）。
- 辦理退換貨時，商品（組合商品恕無法接受單獨退貨）必須是您收到商品時的原始狀態（包含商品本體、配件、贈品、保證書、所有附隨資料文件及原廠內外包裝…等），請勿直接使用原廠包裝寄送，或於原廠包裝上黏貼紙張或書寫文字。
- 退回商品若無法回復原狀，將請您負擔回復原狀所需費用，嚴重時將影響您的退貨權益。
商品評價