自行車道系統規劃設計參考手冊（2025年修訂版)(114淺黃)
活動訊息
分享今年你最有感的書，送50元電子禮券，再抽5000點金幣！
普發一萬放大術：滿千登記抽萬元好禮
內容簡介
本所前於102年4月正式出版「自行車道系統規劃設計參考手冊」，106年配合「104年自行車環島串連路網標誌標線試辦計畫」法制化作業完成及相關法規條文修正進版，推出「自行車道系統規劃設計參考手冊（2017修訂版）」。近年相關法規有許多與自行車相關條文之修訂，加上人本環境之重視與自行車旅遊之推展，自行車道之配置與指示系統亦需檢討納入手冊修訂更新，以提供各單位規劃設計參考應用，爰檢討並提出「自行車道系統規劃設計參考手冊（2025年修訂版）」。
修訂後本手冊內容共有七章，第一章總論說明本手冊編定之目的、手冊內容架構及手冊使用方式（適用範圍、對象及應用）。第二章說明自行車路網及路線規劃原則，藉由路網及路線之友善規劃，做為後續自行車道各項基礎設施設計之基礎。第三章說明自行車使用道路型式之基本分類、使用型式選擇流程及施工交通持等原則。第四章說明自行車道幾何設計原則，包括自行車安全視距、車道寬度要求、側向安全淨寬及淨高、自行車道線形、交叉路口穿越及立體穿越設施設計等規定。第五章說明自行車道鋪面暨附屬設施之設計原則，包括鋪面、排水、欄杆、分隔方式、自行車牽引道、編號及里程標示、導覽牌、自行車停車空間、自行車道照明、自行車道植栽及自行車補給站設置原則等。第六章說明自行車道標誌、標線及號誌等交通工程布設基本原則。第七章說明自行車道計畫評估與維護管理建議，包括完工自主檢視項目與標準、自行車道路線資訊屬性資料庫填報說明、巡查項目與頻率等。本手冊凡涉及現有規範內容者，均以粗體加底線方式呈現，並加註依循規範（依循規範可詳參附錄1-1），俾利規劃者能更精準掌握現有法規規定。
The Institute of Transportation, Ministry of Transportation and Communications (MOTC), officially published the "Bikeway System Planning and Design Reference Manual" in April 2013. In 2017, following the completion of the legalization process for the "2015 Pilot Project on Signage and Markings for the National Cycling Route Network" and the amendment of related regulations, the “Bikeway System Planning and Design Reference Manual (2017)” was released.
In recent years, numerous amendments to regulations related to bicycles have been made. Along with the growing emphasis on people-oriented environments and the promotion of bicycle tourism, the layout and signage systems of bikeways also require review and updates. These revisions will be incorporated into the manual to serve as a reference for planning and design by relevant agencies, leading to the release of the “Bikeway System Planning and Design Reference Manual (2025).”
The revised manual consists of seven chapters. Chapter 1, General Introduction, outlines the purpose of the manual, its content structure, and instructions for use, including its scope of application, target users, and methods of application. Chapter 2 explains the principles of bikeway network and route planning. Through the user-friendly planning of networks and routes, it provides the foundation for the subsequent design of various bikeway infrastructure elements. Chapter 3 describes the basic classification of roadway types for bicycle use, the selection process for appropriate bikeway types, and principles for maintaining traffic flow during construction. Chapter 4 explains the geometric design principles of bikeways, including bicycle stopping sight distance, required lane width, lateral and vertical clearances, bikeway alignment, intersection crossing design, and grade-separated crossing facilities. Chapter 5 outlines the design principles for bikeway pavement and associated facilities, including pavement structure, drainage, guardrails, separation methods, bicycle ramps, route numbering and mileage markers, directional signage, bicycle parking spaces, bikeway lighting, landscaping, and the installation of bicycle service stations. Chapter 6 outlines the fundamental principles of traffic engineering design for bikeways, including signage, pavement markings, and traffic signals. Chapter 7 provides recommendations for bikeway project evaluation and maintenance management, including post-construction self-inspection items and standards, instructions for completing the bikeway route information attribute database, as well as inspection items and frequencies. Every regulation referred to related criteria was bolded and underlined for easy to read and use. Referred specifications were summarized in Appendix1-1.
修訂後本手冊內容共有七章，第一章總論說明本手冊編定之目的、手冊內容架構及手冊使用方式（適用範圍、對象及應用）。第二章說明自行車路網及路線規劃原則，藉由路網及路線之友善規劃，做為後續自行車道各項基礎設施設計之基礎。第三章說明自行車使用道路型式之基本分類、使用型式選擇流程及施工交通持等原則。第四章說明自行車道幾何設計原則，包括自行車安全視距、車道寬度要求、側向安全淨寬及淨高、自行車道線形、交叉路口穿越及立體穿越設施設計等規定。第五章說明自行車道鋪面暨附屬設施之設計原則，包括鋪面、排水、欄杆、分隔方式、自行車牽引道、編號及里程標示、導覽牌、自行車停車空間、自行車道照明、自行車道植栽及自行車補給站設置原則等。第六章說明自行車道標誌、標線及號誌等交通工程布設基本原則。第七章說明自行車道計畫評估與維護管理建議，包括完工自主檢視項目與標準、自行車道路線資訊屬性資料庫填報說明、巡查項目與頻率等。本手冊凡涉及現有規範內容者，均以粗體加底線方式呈現，並加註依循規範（依循規範可詳參附錄1-1），俾利規劃者能更精準掌握現有法規規定。
The Institute of Transportation, Ministry of Transportation and Communications (MOTC), officially published the "Bikeway System Planning and Design Reference Manual" in April 2013. In 2017, following the completion of the legalization process for the "2015 Pilot Project on Signage and Markings for the National Cycling Route Network" and the amendment of related regulations, the “Bikeway System Planning and Design Reference Manual (2017)” was released.
In recent years, numerous amendments to regulations related to bicycles have been made. Along with the growing emphasis on people-oriented environments and the promotion of bicycle tourism, the layout and signage systems of bikeways also require review and updates. These revisions will be incorporated into the manual to serve as a reference for planning and design by relevant agencies, leading to the release of the “Bikeway System Planning and Design Reference Manual (2025).”
The revised manual consists of seven chapters. Chapter 1, General Introduction, outlines the purpose of the manual, its content structure, and instructions for use, including its scope of application, target users, and methods of application. Chapter 2 explains the principles of bikeway network and route planning. Through the user-friendly planning of networks and routes, it provides the foundation for the subsequent design of various bikeway infrastructure elements. Chapter 3 describes the basic classification of roadway types for bicycle use, the selection process for appropriate bikeway types, and principles for maintaining traffic flow during construction. Chapter 4 explains the geometric design principles of bikeways, including bicycle stopping sight distance, required lane width, lateral and vertical clearances, bikeway alignment, intersection crossing design, and grade-separated crossing facilities. Chapter 5 outlines the design principles for bikeway pavement and associated facilities, including pavement structure, drainage, guardrails, separation methods, bicycle ramps, route numbering and mileage markers, directional signage, bicycle parking spaces, bikeway lighting, landscaping, and the installation of bicycle service stations. Chapter 6 outlines the fundamental principles of traffic engineering design for bikeways, including signage, pavement markings, and traffic signals. Chapter 7 provides recommendations for bikeway project evaluation and maintenance management, including post-construction self-inspection items and standards, instructions for completing the bikeway route information attribute database, as well as inspection items and frequencies. Every regulation referred to related criteria was bolded and underlined for easy to read and use. Referred specifications were summarized in Appendix1-1.
配送方式
-
台灣
- 國內宅配：本島、離島
-
到店取貨：
不限金額免運費
-
海外
- 國際快遞：全球
-
港澳店取：
訂購/退換貨須知
加入金石堂 LINE 官方帳號『完成綁定』，隨時掌握出貨動態：
提醒您！！
金石堂及銀行均不會請您操作ATM! 如接獲電話要求您前往ATM提款機，請不要聽從指示，以免受騙上當！
退換貨須知：
**提醒您，鑑賞期不等於試用期，退回商品須為全新狀態**
-
依據「消費者保護法」第19條及行政院消費者保護處公告之「通訊交易解除權合理例外情事適用準則」，以下商品購買後，除商品本身有瑕疵外，將不提供7天的猶豫期：
- 易於腐敗、保存期限較短或解約時即將逾期。（如：生鮮食品）
- 依消費者要求所為之客製化給付。（客製化商品）
- 報紙、期刊或雜誌。（含MOOK、外文雜誌）
- 經消費者拆封之影音商品或電腦軟體。
- 非以有形媒介提供之數位內容或一經提供即為完成之線上服務，經消費者事先同意始提供。（如：電子書、電子雜誌、下載版軟體、虛擬商品…等）
- 已拆封之個人衛生用品。（如：內衣褲、刮鬍刀、除毛刀…等）
- 若非上列種類商品，均享有到貨7天的猶豫期（含例假日）。
- 辦理退換貨時，商品（組合商品恕無法接受單獨退貨）必須是您收到商品時的原始狀態（包含商品本體、配件、贈品、保證書、所有附隨資料文件及原廠內外包裝…等），請勿直接使用原廠包裝寄送，或於原廠包裝上黏貼紙張或書寫文字。
- 退回商品若無法回復原狀，將請您負擔回復原狀所需費用，嚴重時將影響您的退貨權益。
商品評價