Polyolefin Macro - Monofilament Fibre Reinforced High Performance Concrete
Polyolefin Macro - Monofilament Fibre Reinforced High Performance Conc
活動訊息
線上國際書展5折起，指定書單送書展門票，全館滿$1,000送100點金幣
2026年節展，年節禮盒5折起，送禮一次搞定！
內容簡介
The experimental investigation and theoretical analyses presented in this thesis deal with the development of Polyolefin Macro-Monofilament Fibre Reinforced High Performance Concrete (PMMFRHPC) is presented in this thesis. The scope of its structural applications is also highlighted at the end of the thesis. The concrete mix adopted in this investigation was designed based on the guidelines of ACI 211.4R-'08, 'Guide for Selecting Proportions for High Strength Concrete with Portland and Other Cementitious Materials. PMMFRHPC mixes were produced by incorporating the mineral admixtures such as fly ash and metakaolin (10% each) and by adding Polyolefin Macro-Monofilament (PMM) Fibres at different volume fractions from 0.1% to 0.3 percent. Five different concrete mixes namely, one without admixtures and fibres, one with admixtures and without fibres and the remaining three mixes with admixtures containing 0.1, 0.2 and 0.3 percentages of fibres were considered in this investigation. The workability of concrete mixes was measured using slump test. The mechanical properties such as cube compressive strength at the age of 28, 56 and 90 days, and cylinder splitting tensile strength, modulus of rupture, modulus of elasticity and Poisson's ratio at the age of 28 days were determined. Totally 105 hardened concrete specimens were cast for the above five types of concrete mixes. For PMMFRHPC, empirical relationships were developed to predict the splitting tensile strength and modulus of rupture from the 28 days compressive strength. Mathematical equations were also developed to predict the mechanical properties in terms of quantity of constituent materials. In addition to that, 306 specimens were cast and tested to determine the durability of PMMFRHPC through the measurement of voids permeability, water absorption, permeability, acid resistance, impact resistance, drying shrinkage, rapid chloride penetration and corrosion resistance at the age of 28, 56, 90 and 120 days. The correlations were obtained for durability studies with respect to age, volume fraction of fibre and compressive strength. Mathematical relations have been developed to predict the durability properties in terms of quantity of constituent materials. In order to investigate the possibility of using PMMFRHPC for structural applications, ten reinforced concrete beams of size 100 mm x 200 mm x 1700 mm were cast and tested. Out of these ten beams, five beams were tested by gradually applying symmetrical two point loading up to failure and the deformation characteristics have been studied by measuring deflections and observing the crack patterns. The applicability of Whitney's Theory to predict the ultimate flexural strength of PMMFRHPC beams has been examined. Using the properties of concrete mixes theoretical deflections have been calculated by conjugate beam theory and compared with the experimental values. The influence of fibre content on energy absorption capacity and toughness index was also evaluated. The displacement ductility and the rotation ductility factors were also derived. Finite Element Analysis (FEA) using 'ANSYS' 12.0 software has been carried out and the outcome of the analysis was compared with experimental values. The remaining five reinforced concrete beams were tested by applying cyclic loading. Forty five percentage of static ultimate load was considered for cyclic loading. The number of cycles withstood by each beam before complete collapse was recorded and the crack patterns were observed. The effect of fibre content on the energy absorption capacity and the structural behaviour was also studied.
配送方式
-
台灣
- 國內宅配：本島、離島
-
到店取貨：
不限金額免運費
-
海外
- 國際快遞：全球
-
港澳店取：
訂購/退換貨須知
加入金石堂 LINE 官方帳號『完成綁定』，隨時掌握出貨動態：
商品運送說明：
- 本公司所提供的產品配送區域範圍目前僅限台灣本島。注意！收件地址請勿為郵政信箱。
- 商品將由廠商透過貨運或是郵局寄送。消費者訂購之商品若無法送達，經電話或 E-mail無法聯繫逾三天者，本公司將取消該筆訂單，並且全額退款。
- 當廠商出貨後，您會收到E-mail出貨通知，您也可透過【訂單查詢】確認出貨情況。
- 產品顏色可能會因網頁呈現與拍攝關係產生色差，圖片僅供參考，商品依實際供貨樣式為準。
- 如果是大型商品（如：傢俱、床墊、家電、運動器材等）及需安裝商品，請依商品頁面說明為主。訂單完成收款確認後，出貨廠商將會和您聯繫確認相關配送等細節。
- 偏遠地區、樓層費及其它加價費用，皆由廠商於約定配送時一併告知，廠商將保留出貨與否的權利。
提醒您！！
金石堂及銀行均不會請您操作ATM! 如接獲電話要求您前往ATM提款機，請不要聽從指示，以免受騙上當！
退換貨須知：
**提醒您，鑑賞期不等於試用期，退回商品須為全新狀態**
-
依據「消費者保護法」第19條及行政院消費者保護處公告之「通訊交易解除權合理例外情事適用準則」，以下商品購買後，除商品本身有瑕疵外，將不提供7天的猶豫期：
- 易於腐敗、保存期限較短或解約時即將逾期。（如：生鮮食品）
- 依消費者要求所為之客製化給付。（客製化商品）
- 報紙、期刊或雜誌。（含MOOK、外文雜誌）
- 經消費者拆封之影音商品或電腦軟體。
- 非以有形媒介提供之數位內容或一經提供即為完成之線上服務，經消費者事先同意始提供。（如：電子書、電子雜誌、下載版軟體、虛擬商品…等）
- 已拆封之個人衛生用品。（如：內衣褲、刮鬍刀、除毛刀…等）
- 若非上列種類商品，均享有到貨7天的猶豫期（含例假日）。
- 辦理退換貨時，商品（組合商品恕無法接受單獨退貨）必須是您收到商品時的原始狀態（包含商品本體、配件、贈品、保證書、所有附隨資料文件及原廠內外包裝…等），請勿直接使用原廠包裝寄送，或於原廠包裝上黏貼紙張或書寫文字。
- 退回商品若無法回復原狀，將請您負擔回復原狀所需費用，嚴重時將影響您的退貨權益。
商品評價