Welder Practice Questions
活動訊息
普發一萬放大術：滿千登記抽萬元好禮
全站滿$1000送100點金幣，可累送! 新會員直接領$500！
內容簡介
Welder practice questions similar to Red Seal or AWS, prepared by our dedicated team of exam experts. This is a challenging test and getting the proper test prep is critical to passing!
We have helped thousands of students reach their career and education goals.
Practice with over 120 practice questions with full answer key and explanation.
Practice test questions include:
-Submerged arc welding
-Common Occupational Skills
-Fabrication of welding components
-Oxy-fuel gas cutting
-Plasma arc cutting
-Air carbon arc cutting
-Shielded metal arc cutting
-Gas metal arc and metal cored arc welding
-Gas tungsten arc welding
-And a lot more!
Complete Test Preparation Inc. is not affiliated Red Seal or AWS, who are not involved in the production of, and do not endorse this publication.
Example Questions
What is the advantage of low carbon electrode and plate material for welding austenitic stainless steel?
a.Prevent cracking in the heat affected zone
b.The formation of chromium carbides
c.Prevent cracking in the weld metal
d.Prevent distortion
Answer B
Welding stainless steel requires low carbon content for both the base metal and the filler metal to avoid sensitization. This occurs with the formation of chromium carbides in heat affected zones and weld metal, so the free chromium available in the material after sensitization is lower than the protection limit (10.4%Cr) that enables the material to resist corrosion.
Which of the following materials are cut using the traditional oxy-fuel cutting process?
a.Aluminum alloys
b.Stainless steel alloys
c.Carbon and low alloy steel
d.Copper alloys
Answer: C
Only carbon and low alloy steel can be cut with an oxy-fuel cutting process.
Criteria of traditional oxy-fuel cutting processes includes:
The material must have the capability of burning in a stream of oxygen.The materials ignition temperature must be lower than its melting temperature.Its heat conductivity should be relatively low. [not applicable for copper or aluminum]The metal oxide produced must melt at a temperature below the melting point of the metal. [not applicable for aluminum]The formed slag must be of low viscosity. [not applicable for copper, aluminum and stainless steel].
Practice Makes Perfect
Really! The more questions you see, the more likely you are to pass the test. And between our study guide and practice tests, you'll have over 120 practice questions that cover every category. You can fine-tune your knowledge in areas where you feel comfortable and be more efficient in improving your problem areas.
Our test has been developed by our dedicated team of experts. All the material in the study guide, including every practice question, is designed to engage the critical thinking skills that are needed to pass the welder test.
Maybe you have read this kind of thing before, and maybe feel you don't need it, and you are not sure if you are going to buy this book. Remember though, it only a few percentage points divide the PASS from the FAIL students. Even if our test tips increase your score by a few percentage points, isn't that worth it?
Why not do everything you can to get the best score on the welder test?
配送方式
-
台灣
- 國內宅配：本島、離島
-
到店取貨：
不限金額免運費
-
海外
- 國際快遞：全球
-
港澳店取：
訂購/退換貨須知
加入金石堂 LINE 官方帳號『完成綁定』，隨時掌握出貨動態：
商品運送說明：
- 本公司所提供的產品配送區域範圍目前僅限台灣本島。注意！收件地址請勿為郵政信箱。
- 商品將由廠商透過貨運或是郵局寄送。消費者訂購之商品若無法送達，經電話或 E-mail無法聯繫逾三天者，本公司將取消該筆訂單，並且全額退款。
- 當廠商出貨後，您會收到E-mail出貨通知，您也可透過【訂單查詢】確認出貨情況。
- 產品顏色可能會因網頁呈現與拍攝關係產生色差，圖片僅供參考，商品依實際供貨樣式為準。
- 如果是大型商品（如：傢俱、床墊、家電、運動器材等）及需安裝商品，請依商品頁面說明為主。訂單完成收款確認後，出貨廠商將會和您聯繫確認相關配送等細節。
- 偏遠地區、樓層費及其它加價費用，皆由廠商於約定配送時一併告知，廠商將保留出貨與否的權利。
提醒您！！
金石堂及銀行均不會請您操作ATM! 如接獲電話要求您前往ATM提款機，請不要聽從指示，以免受騙上當！
退換貨須知：
**提醒您，鑑賞期不等於試用期，退回商品須為全新狀態**
-
依據「消費者保護法」第19條及行政院消費者保護處公告之「通訊交易解除權合理例外情事適用準則」，以下商品購買後，除商品本身有瑕疵外，將不提供7天的猶豫期：
- 易於腐敗、保存期限較短或解約時即將逾期。（如：生鮮食品）
- 依消費者要求所為之客製化給付。（客製化商品）
- 報紙、期刊或雜誌。（含MOOK、外文雜誌）
- 經消費者拆封之影音商品或電腦軟體。
- 非以有形媒介提供之數位內容或一經提供即為完成之線上服務，經消費者事先同意始提供。（如：電子書、電子雜誌、下載版軟體、虛擬商品…等）
- 已拆封之個人衛生用品。（如：內衣褲、刮鬍刀、除毛刀…等）
- 若非上列種類商品，均享有到貨7天的猶豫期（含例假日）。
- 辦理退換貨時，商品（組合商品恕無法接受單獨退貨）必須是您收到商品時的原始狀態（包含商品本體、配件、贈品、保證書、所有附隨資料文件及原廠內外包裝…等），請勿直接使用原廠包裝寄送，或於原廠包裝上黏貼紙張或書寫文字。
- 退回商品若無法回復原狀，將請您負擔回復原狀所需費用，嚴重時將影響您的退貨權益。
商品評價