Introduction to Microcontroller Programming for Power Electronics Control Applications
活動訊息
普發一萬放大術：滿千登記抽萬元好禮
大數據幫你找下一本愛書！今天填寫，隔天立刻揭曉！
內容簡介
Microcontroller programming is not a trivial task. Indeed, it is necessary to set correctly the required peripherals by using programming languages like C/C++ or directly machine code. Nevertheless, MathWorks(R) developed a model-based workflow linked with an automatic code generation tool able to translate Simulink(R) schemes into executable files. This represents a rapid prototyping procedure, and it can be applied to many microcontroller boards available on the market. Among them, this introductory book focuses on the C2000 LaunchPadTM family from Texas InstrumentsTM to provide the reader basic programming strategies, implementation guidelines and hardware considerations for some power electronics-based control applications. Starting from simple examples such as turning on/off on-board LEDs, Analog-to-Digital conversion, waveform generation, or how a Pulse-Width-Modulation peripheral should be managed, the reader is guided through the settings of the specific MCU-related Simulink(R) blocks enabled for code translation. Then, the book proposes several control problems in terms of power management of RL and RLC loads (e.g., involving DC-DC converters) and closed-loop control of DC motors. The control schemes are investigated as well as the working principles of power converter topologies needed to drive the systems under investigation. Finally, a couple of exercises are proposed to check the reader's understanding while presenting a processor-in-the loop (PIL) technique to either emulate the dynamics of complex systems or testing computational performance.
Thus, this book is oriented to graduate students of electrical and automation and control engineering pursuing a curriculum in power electronics and drives, as well as to engineers and researchers who want to deepen their knowledge and acquire new competences in the design and implementations of control schemes aimed to the aforementioned application fields. Indeed, it is assumed that the reader is well acquainted with fundamentals of electrical machines and power electronics, as well as with continuous-time modeling strategies and linear control techniques. In addition, familiarity with sampled-data, discrete-time system analysis and embedded design topics is a plus.
However, even if these competences are helpful, they are not essential, since this book provides some basic knowledge even to whom is approaching these topics for the first time. Key concepts are developed from scratch, including a brief review of control theory and modeling strategies for power electronic-based systems.
配送方式
-
台灣
- 國內宅配：本島、離島
-
到店取貨：
-
海外
- 國際快遞：全球
訂購/退換貨須知
加入金石堂 LINE 官方帳號『完成綁定』，隨時掌握出貨動態：
商品運送說明：
- 本公司所提供的產品配送區域範圍目前僅限台灣本島。注意！收件地址請勿為郵政信箱。
- 商品將由廠商透過貨運或是郵局寄送。消費者訂購之商品若無法送達，經電話或 E-mail無法聯繫逾三天者，本公司將取消該筆訂單，並且全額退款。
- 當廠商出貨後，您會收到E-mail出貨通知，您也可透過【訂單查詢】確認出貨情況。
- 產品顏色可能會因網頁呈現與拍攝關係產生色差，圖片僅供參考，商品依實際供貨樣式為準。
- 如果是大型商品（如：傢俱、床墊、家電、運動器材等）及需安裝商品，請依商品頁面說明為主。訂單完成收款確認後，出貨廠商將會和您聯繫確認相關配送等細節。
- 偏遠地區、樓層費及其它加價費用，皆由廠商於約定配送時一併告知，廠商將保留出貨與否的權利。
提醒您！！
金石堂及銀行均不會請您操作ATM! 如接獲電話要求您前往ATM提款機，請不要聽從指示，以免受騙上當！
退換貨須知：
**提醒您，鑑賞期不等於試用期，退回商品須為全新狀態**
-
依據「消費者保護法」第19條及行政院消費者保護處公告之「通訊交易解除權合理例外情事適用準則」，以下商品購買後，除商品本身有瑕疵外，將不提供7天的猶豫期：
- 易於腐敗、保存期限較短或解約時即將逾期。（如：生鮮食品）
- 依消費者要求所為之客製化給付。（客製化商品）
- 報紙、期刊或雜誌。（含MOOK、外文雜誌）
- 經消費者拆封之影音商品或電腦軟體。
- 非以有形媒介提供之數位內容或一經提供即為完成之線上服務，經消費者事先同意始提供。（如：電子書、電子雜誌、下載版軟體、虛擬商品…等）
- 已拆封之個人衛生用品。（如：內衣褲、刮鬍刀、除毛刀…等）
- 若非上列種類商品，均享有到貨7天的猶豫期（含例假日）。
- 辦理退換貨時，商品（組合商品恕無法接受單獨退貨）必須是您收到商品時的原始狀態（包含商品本體、配件、贈品、保證書、所有附隨資料文件及原廠內外包裝…等），請勿直接使用原廠包裝寄送，或於原廠包裝上黏貼紙張或書寫文字。
- 退回商品若無法回復原狀，將請您負擔回復原狀所需費用，嚴重時將影響您的退貨權益。
商品評價